Menu
Your Cart

Thermaltake Toughpower TF1 1550W 80+ Titanium Full Modular PSU with 140mm Fan

Thermaltake Toughpower TF1 1550W 80+ Titanium Full Modular PSU with 140mm Fan
Thermaltake Toughpower TF1 1550W 80+ Titanium Full Modular PSU with 140mm Fan
  • Stock: In Stock
  • Model: 092
$0
Product Description

Thermaltake Toughpower TF1 1550W 80+ Titanium Full Modular PSU with 140mm Fan

PS-TPD-1550FNFATE-1

 

Toughpower TFI 1550W - TT Premium Edition

80 PLUS Titanium certified, fully modular PSU with 140 mm Pulse Width Modulation fan.

 

Toughpower TFI 1550W - TT Premium Edition

Designed for overclockers, users with high-end system demands, and more, the Toughpower TFI Titanium 1550W, 80 PLUS Titanium to meet their efficiency needs. «Aside from critical features such as 30mV low ripple noise, extremely Tight Voltage Regulation 20/0 and Dwell time - 16 milliseconds, Thermaltake has also added three vital features: Ensure the Toughpower TFI Titanium 1550W powers the entire system consistently and safely. First, Low Transient Response Second, Inrush current 450 Amps. Finally, 12V OCP protection is covered. PC-enthusiasts are looking for a premium power supply with all the latest features.

 

 

Turbo Fan Button

The turbofan knob is designed to maximize airflow input of approximately 24009610 RPM for cooling. at full load with the power supply off. Users can easily press the button on the back of the PSU panel to use this function.

 

 

Extra Jumper Accessory

Toughpower TFI Titanium 1550W comes with an extra jumper to power the system without connecting to the motherboard. If you need more than one power supply to power your system, the extra jumper will be very helpful.

 

 

Low Transient Response

Transient response is a measure of how well the power supply can handle its output. The constant changes in response to load. We ensure that the results are compatible with 12V 1%, 5V4 3%, and 3.3V 5% to avoid PSU output voltage deviation, which will then cause the equipment to malfunction or even shut down.

 

 

Initial current 50 Amps

Inrush current is the instantaneous high input current drawn by a power supply or electrical equipment at startup. This occurs due to the high starting currents required to charge capacitors, inductors or transformers. We ensure that the test results are below 50 amps to prevent damage to PSU components.

 

 

140mm Pulse Width Modulation Fan

Features a 140mm Pulse Width Modulation Fan with smart RPM controls to help ensure superior cooling performance and near-silent operation.

 


Product Information
Strength1500W
Power Efficiency80 PLUS TITANIUM
modularFull Modular
PSU TypeATX
Main Connector24Pin
ATX 3.0None
PCI-E Connection6+2-Pin x 8
Sata Connection16
Fanone
PFC ValueActive

Write a review

Note: HTML is not translated!
Bad Good